3D Mold Making,DXF Design, Komo, Model Construction, Digital Model Scanning, Mold Machining, Foundry Pattern and Mold Modeling, CNC Engraver Programming, Logo Design, Smartcam, Komo Router

Statesboro, Georgia 30458
Voice 1-912-489-1999
FAX   1-912-489-6008
E-mail 
gailey@frontiernet.net

  
Legacy Public Domain Files for Smartcam V11.5 and earlier ONLY!
 
Disclaimer

Fair Warning
 about using generic PRE-V14.5 macros downloaded from this website in the newer SmartCAM V14.5:

The macro language in V14.5 SmartCAM and earlier versions of SmartCAM [such as v11.5 and before] are NOT compatible.  V14.5 has an upgraded and extended macro language that will not process older version/legacy macros properly.
It is your responsibility to READ ALL DOCUMENTATION
 packaged with ANY and ALL downloaded files and
UNLESS the zip file contents say specifically that a file is compatible with V14.5, it is understood that there is NO compatibility. ANY and ALL free downloads should ALWAYS be scrutinized before "assuming" any compatibility higher than SmartCAM V11.5

  SmartCAM V14.5 and higher is supported through SMA by SmartCAMcnc
We recommend that you support and contact your SmartCAM SMA area first!

These SmartCAM Macros and Utilities for SmartCAM 11.5 and earlier ONLY!

Attention! This area is for public domain files. 
The files in this area are uploaded by the general public in the effort
to promote the  sharing of ideas and information with other 
Smartcam software users. 


SmartCAM Custom Macros 
SmartCAM Report Generators 
SmartCAM Material Libraries
Code Generation and Post Processing 
Tools and Utilities

SmartCAM Report Generators  for SmartCAM 11.5 and earlier ONLY!

OLDREP.ZIP   Step Report that is made to look like a Version 8.xx report.
3 Files. (Revised 9/25/96) 

TOGGLE.ZIP   Toggles the output format of your speed and feed values.
Outputs whatever format is selected in the Job Planner. 2 Files.

COMPJOB.FMT   A complete Job Report for milling operations. 1 file.